Shop – Jumbo Tanks

Underground Tanks

admin — Fri, 30 Jul 2021 07:21:05 +0000

Underground Jumbo Tanks enable you to gather municipal water even when the pressure is low, allowing you to pump it up at your convenience to redistribute it in other areas of use. Harvesting of rainwater is also in the same manner since gravity forces it to collect in.

Septic Tanks

admin — Fri, 30 Jul 2021 07:00:09 +0000

Our septic tanks are underground plastic tanks through which domestic wastewater (sewage) flows for basic treatment. They use a combination of nature and proven technology to treat wastewater from household plumbing produced by bathrooms, kitchen drains, and laundry.

Loft Tanks

admin — Fri, 30 Jul 2021 06:53:20 +0000

Loft tanks have been seen as a way of maintaining the aesthetics of a home and yet meet the need of having a regular supply of water. Their shape and design enables one to install them in an already constructed house as well as one ongoing construction.

HDPE Pipes

admin — Thu, 29 Jul 2021 13:49:45 +0000

HDPE pipes with the same operating pressure and diameter have a thinner wall thickness than low density pipes. In this respect, the thinner wall thickness of HDPE pipes creates a larger inner diameter, and it is possible to use smaller diameter for the same flow rate, but it also saves raw material. The maximum working temperature for the pipes is 65°C.

Main Advantages

Construction Cost Savings

Construction cost of PE pipe can be significantly less than other pipe materials.

Leak-Free, Fully Restrained Joints

PE heat fusion joining forms leak-free joints that are as strong as, or stronger than, the pipe itself. For municipal applications, fused joints eliminate the potential leak points.

Construction Advantages

PE pipe’s combination of light weight, flexibility and leak-free, fully restrained joints permits unique and cost-effective installation methods that are not practical with alternate materials.

Durability

PE pipe installations are cost-effective and have long-term cost advantages due to the pipe’s physical properties, leak-free joints, and reduced maintenance costs.

Produced in longer lengths

HDPE pipes can be produced in 50 meter to 100meter lengths.

Normal PP-R Pipe Roll

admin — Thu, 29 Jul 2021 13:23:26 +0000

The pipes are produced by Astral Ind. to the highest standard possible to satisfy the market demands and requirements. As temperature increases, the maximum working pressure of the pipes should be reduced. The following table gives the recommended maximum operating pressures for all PP-R pipes.

Main Advantages

Quality

Raw materials meet the requirement of DIN, TSE, ISO 9002 standards.

Chemical & Mechanical Endurance

Compared to traditional plastic piping systems, PP-R offers very high resistance against abrasion by hard particles. This is especially important in cases of well water or industrial applications, where the transferred liquids may contain abrasive particles.

Corrosion and chemical resistance

These pipes are resistant to corrosion and aggressive environment; their transmission capacity is high due to smooth inner surface.

Environmentally cleanness

Polypropylene does not react with water, therefore, does not add any taste to the water. Since their inner surface is slippery organic and inorganic sediments and impurities are not observed.

Durability

It can endure the temperature and pressure strain of hot water systems. At the same time it is able to structurally withstand impacts even in cold weather installations without any risk of cracking or breaking, unlike other common types of plastic piping.

Normal PP-R Pipes

admin — Thu, 29 Jul 2021 12:50:48 +0000

Main Advantages

Quality

Raw materials meet the requirement of DIN, TSE, ISO 9002 standards.

Chemical & Mechanical Endurance

Corrosion and chemical resistance

These pipes are resistant to corrosion and aggressive environment; their transmission capacity is high due to smooth inner surface.

Environmentally cleanness

Polypropylene does not react with water, therefore, does not add any taste to the water. Since their inner surface is slippery organic and inorganic sediments and impurities are not observed.

Durability

PVC-U Acoustic Pipe

admin — Wed, 28 Jul 2021 08:05:49 +0000

PVC-U Acoustic pipes are basically multilayer pipes having outer and inner layers of conventional PVC and middle hollow layer for 110mm & 160mm. The hollow layer gives an acoustic effect hence lowers the noise produced from the pipe. The hollow grid layout provides extra structural strength hence increasing rigidity.

Main Advantages

Reduction in noise level

Due to the middle layer, the silent pipes have exceptionally good noise insulating properties which act to reduce the noise generated by transportation of fluid inside the pipe. The reduction in noise levels is more that 6db.

Directs flow

The veins inside the pipe assist in reducing vortex hence directing the flow while giving better flow characteristics.

Easy to Install

They are easy to install. In fact, silent pipes do not require any special care or procedure for installation.

Excellent chemical and corrosion resistance

Being non-metallic, this system is completely free from corrosion and offers exceptionally good resistance to wide range of chemicals.

Quick and efficient removal of waste without leakage

Mirror smooth and restriction free inner surface of pipes ensures superior flow characteristics, thus the pipes are free from problems of clogging and drain choke-up. System is completely leak-proof and designed to maintain high standards of hygiene.

Least maintenance

Once installed the Pipes require minimal maintenance.

PP-R UV Protected Pipes

admin — Wed, 28 Jul 2021 07:48:45 +0000

PP-R UV pipes are manufactured as per KS ISO minimum requirements with additional UV protection. The following table givves the recommended maximum operating pressure for all PP-R UV pipes.

Main Advantages

Odourless and hygienic

These pipes are most ideal for carrying drinking water as they do not subject to contamination.

Protected against UV rays

The UV protected layer is comprised of UV resistant materials which protect the pipe from flaking when exposed to sunlight over time.

High chemical resistance

Pipes offer excellent resistance to acids, oxidizing agents, alkalis, oils and domestic effluents.

Smooth bore

Pipes have a smooth inside surface and hence better flow characteristics.

Longer lasting

As these pipes are free from weaknesses caused by scale formation, rusting, weathering and chemical action they last or a lifetime

Installation

The installation methodology and requirement are the same as normal PP-R pipes.

PP-R Thermal Insulated Pipes (PN20)

admin — Wed, 28 Jul 2021 07:41:58 +0000

PP-R Thermal insulated pipes are manufactured as per KS ISO minimum requirements to attain better insulation than normal PP-R pipes for hot and cold water. The following table gives the recommended maximum operating pressure for all PP-R thermal insulated pipes.

Main Advantages

Protected against UV rays

The UV protected layer is comprised of UV resistant materials which protect the pipe from flaking when exposed to sunlight over time.

Thermal Resistance

Have better thermal resistivity than standard PP-R pipes.

Chemical & Mechanical Endurance

Very high resistance against abrasion by hard particles. This is especially important in cases of well water or industrial applications, where the transferred liquids may contain abrasive particles.

Corrosion and chemical resistance

These pipes are resistant to corrosion and aggressive environment; their transmission capacity is high due to smooth inner surface.

Environmentally cleanness

Polypropylene does not react with water, therefore, does not add any taste to the water. Since their inner surface is slippery organic and inorganic sediments and impurities are not observed.

Durability

PP-R UV Composite Pipes (PN25)

admin — Wed, 28 Jul 2021 07:25:31 +0000

PP-R UV Composite pipes are manufactured as per KS ISO minimum requirements. They are also made to be rigid and have memory while being protected from harmful UV rays. The following table gives the recommended maximum operating pressure for all PP-R UV Composite pipes.

Main Advantages

Protected against UV rays

The UV protected layer is comprised of UV resistant materials which protect the pipe from flaking when exposed to sunlight over time.

Rigid with memory

The Composite material provides rigidity with memory to the pipes allowing them to be laid straighter.

Chemical & Mechanical Endurance

They offer very high resistance against abrasion by hard particles. This is especially important in cases of well water or industrial applications, where the transferred liquids may contain abrasive particles.

Corrosion and chemical resistance

These pipes are resistant to corrosion and aggressive environment; their transmission capacity is high due to smooth inner surface.

Durability