Preparing a base for your Jumbo Tank.

Tanks are an investment and we must ensure we maintain them so that they can serve us for longer. We give you tips on how you can lay a proper base for your Jumbo tank and not stress on its stability any more. There are different types of bases and one can work around them depending on your preference or budget. Some of the bases include: sand, pea gravel, concrete and clay. – If using a concrete base, remove rocks from the surface – Small and large rocks can puncture the bottom of any poly water storage tank. With water in the tank, this can create a lot of pressure on the base of the tank. – Never use two bases for a single water tank – Some people install their tank half on concrete and half on clay base. The problem with this is when it rains, the dirt can wash away. This puts extra pressure on the base of the tank and can create cracks and splits. – If using sand or clay base, make sure it is supported. Heavy rains can quickly wash away sand or clay from under your tank. Ensure that there is good drainage around the tank and that the sand or clay is supported with something like concrete, rocks or timber. – Use rebar or mesh when pouring a concrete base – This will ensure the concrete is strong and will not break down over time. If you are unsure where to get this from or how to install it, speak to a concreting professional. – When using sand, clay or gravel, ensure the surface is compacted. A compacted surface will mean a level and an even surface. This will prevent any unneeded pressure being put on certain parts of the tank base. Article by: Maryanne – Marketing Executive